vortex logo

Vertical Blenders are ideal for low shear blending

Ask An Expert

Frequently Asked Questions

Do you manufacture controls for your mixers?2021-10-18T15:42:51+08:00

Yes,  We can supply simple stand alone panels or automated PLC controlled systems. We normally install and test all controls on our mixers before they are shipped.

Is the your mixer machine easy to install?2021-10-18T15:40:34+08:00

Yes, we normally test the mixers before they are shipped and mark out the wire need to connect on the control box.

What types of mixing equipment does the company specialize in?2021-10-18T15:36:40+08:00

We manufacture specialty mixing equipment for powder & bulk materials. Included are ribbon blender, plough mixer, conical screw mixer, twin shaft paddle mixer, V blender, double cone blender and other auxiliary equipment such as screw conveyor, quantitive auger filler.

Do you sell to our country?2021-10-18T15:31:19+08:00

We sell across the world, our cusotmers distribute 5 continents.

Share Us With Your Network

Vertical Blenders are ideal for low shear blending

The mixing action in a Vertical Blender is far gentler than that of ribbon, paddle or other horizontal blenders, making it more suitable for delicate and abrasive applications. Spray nozzles may be installed for liquid addition and coating purposes.

Vertical Blenders are also commonly used in vacuum drying operations and can accommodate a wide range of feed forms including slurries, wet cakes, pastes and flowable solids. Requiring only low heat to drive off moisture or solvents, vacuum drying in a Vertical Blender is an excellent method for drying heat-sensitive materials without fear of thermal degradation. Other processing advantages include low energy consumption, fast drying rates and effective solvent recovery.

An important design feature that is standard on all Vortex Vertical Blenders is the absence of a bottom support bearing which facilitates complete discharge, simplifies cleaning and lowers the risk of batch-to-batch contamination. This design also allows the machine to be operated with very little maintenance. Many standard sizes from 1 through 500 cu.ft. capacities are available. Shown is a 350-cu.ft. Vortex Vertical Blender designed for full vacuum up to 30 psig internal pressure at 300oF. It is equipped with an ASME 50-psig stainless steel jacket and explosion-proof motors to drive the screw (25 HP) and swing arm (1.5 HP).

For more information on Vortex Vertical Blenders or to speak with a specialist about your blending or drying requirements, mailto nick@incmachine.com today.

Share Us With Your Network

Title

Go to Top