vortex logo

Ribbon Blenders for Powder Blending

Ask An Expert

Frequently Asked Questions

Do you manufacture controls for your mixers?2021-10-18T15:42:51+08:00

Yes,  We can supply simple stand alone panels or automated PLC controlled systems. We normally install and test all controls on our mixers before they are shipped.

Is the your mixer machine easy to install?2021-10-18T15:40:34+08:00

Yes, we normally test the mixers before they are shipped and mark out the wire need to connect on the control box.

What types of mixing equipment does the company specialize in?2021-10-18T15:36:40+08:00

We manufacture specialty mixing equipment for powder & bulk materials. Included are ribbon blender, plough mixer, conical screw mixer, twin shaft paddle mixer, V blender, double cone blender and other auxiliary equipment such as screw conveyor, quantitive auger filler.

Do you sell to our country?2021-10-18T15:31:19+08:00

We sell across the world, our cusotmers distribute 5 continents.

Share Us With Your Network

Ribbon Blenders for Powder Blending

Vortex Light Duty Ribbon Blenders are used for straightforward blending of powders or other solid raw materials with a bulk density of 35 lbs/cu.ft. or lower. Priced very competitively and with many different sizes always in stock, these blenders are offered with the following standard features:
Stainless steel wetted parts polished to 60-grit finish.
Solid-shaft double ribbon agitator
Knife gate discharge valve.
One, two or three-piece cover (depending on the size) supplied with neoprene gaskets.
Clamps to eliminate dusting and fume migration.
Safety limit switches to prevent operation when covers are raised.
Stuffing boxes with easily disassembled split housing.
Teflon braided packing.
230/460 volt, 60 Hz, three phase TEFC motors.
Blender is mounted on supports providing 36” discharge clearance.
Available from 1/2 to 1,000 cubic feet working capacity.

Vortex also manufactures customizable Ribbon Blenders for product densities above 35 lbs/cu.ft. An extensive range of optional features including pneumatically-operated covers and valve, bag dump station, safety grating, high speed chopper, vacuum/pressure design, heating/cooling jacket, liquid spray bar, load cells and PLC recipe system are offered to accommodate particular processing requirements.

Share Us With Your Network

Go to Top