Powder Mixer for GMP standard
The Sanitary Mixers are all manufactured in type 316 stainless steel and are polished to a 320 grit finish with no cracks or crevices to trap product to enable easy cleaning between batches. Agitators and shaft assemblies are designed and constructed with generous radius and smooth weld finishes. Split seal housings are easily removed without tools for easy inspection. Structural components are available in corrosion resistant stainless steel for use in wash down environments.
According to FDA criteria, the food contact surfaces must meet the following criteria:
- The surface must be non-toxic to the food.
- The surface must be non-reactive with the food.
- The surface must be non-contaminating to the food.
- The surface must be non-corrosive
- The surface must be cleanable
Internal surfaces are polished to a minimum 300 grit finish with no cracks or crevices to trap product. The agitator components are welded and then ground smooth with free flowing, curved surfaces to allow easier cleaning.
No matter ribbon, paddle, screw and plough, they are hand crafted and precision machined to maintain a clean, efficient mixing action with minimal wear on seals and bearing components. The agitators are welded and then ground smooth with free flowing, curved surfaces to allow easier cleaning.
It is available with a variety of custom cover designs. Features such as bar-style hinged covers, hinged bag dumps and hinged hood assemblies allow complete access for equipment wash down.
Cleaning-In-Place (CIP) is system designed for automatic cleaning and disinfecting with-out major dis-assembly and assembly work.
Through Assembly without flanges
Troughs and end plates are fabricated from 304 or 316 stainless steel. The plates are straight-line polished and then rolled to match the radius of the agitator.
Split seals are fabricated from 304 or 316 stainless steel. The seal mounting plates and housings are machined as match sets. The split housing design simplifies cleaning for applications requiring high levels of sanitation.
Food Grade butterfly valve, flap valve, ball valve and slide gate valve is recommended.
Cleaning Door/Inspection Door
Daily and frequent cleaning is very important for food industry. Easily access to clean for worker can avoid contamination and efficiently clean every part inside the mixer.
Suitable Mixers: Ribbon Mixer, Conical Screw Mixer, Plough Mixer, Single Shaft Paddle Mixer, V Cone Mixer, Double Cone Mixer.
Food Industry Customer
|Unilever||Mars||Chia Tai Group|
|Good Food S.A||Cramer S.A||Dole Food|
|Tera||Glanbia||Rich Products Corp|